How to Build the MGEX Strike Freedom Gundam Kit

Quick Answer

Assemble the MGEX Strike Freedom Gundam by carefully following the manual, using proper tools, and taking time with the inner frame and gold-plated parts for the best results.

Building the MGEX Strike Freedom: Step by Step

1. Prepare Your Workspace and Tools: Clear a large, well-lit area. Gather side cutters, a hobby knife, sanding sticks, and tweezers for decals. Read the manual completely before cutting any parts. Common mistake: skipping the manual overview leads to confusion later. Check part numbers before cutting.
2. Cut and Clean the Runners: Use sharp side cutters to snip parts from the runners, leaving a small nub. Trim the nub with a hobby knife and sand smooth if needed. For gold-plated parts, cut carefully to avoid chipping the plating. Checkpoint: inspect each part for stress marks or flashing. Clean nubs ensure tight joints.
3. Assemble the Inner Frame: Follow the manual to build the articulated inner skeleton. Pay attention to orientation of polycaps and joint pegs. The MGEX frame is complex; dry-fit parts before final assembly. Common mistake: forcing joints can break pegs. If a part feels tight, check alignment.
4. Attach Armor and Gold-Plated Parts: Snap on the white and blue armor pieces, then carefully attach the gold-plated sections. Use tweezers for small parts. Avoid glue unless specified; the kit is designed for snap-fit. Checkpoint: gold plating scratches easily. Handle parts by the edges, not the surface.
5. Apply Stickers and Decals: Use the included foil stickers and dry-transfer decals to add detail. Position each decal precisely with tweezers. Rub firmly for dry transfers; use a cotton swab to avoid tearing. Common mistake: rushing decals causes misalignment. Work in good light and take breaks.
6. Final Assembly and Pose: Attach the wings, dragoon pods, and weapons. Pose the figure carefully, supporting joints while adjusting. Display on a stand if possible to reduce stress on the ankles. Checkpoint: test articulation before final display. Tighten loose joints with a tiny drop of glue on the peg (let it dry before reassembling).

Kit Overview

• MGEX 1/100 Gundam SEED Destiny Strike Freedom Gundam: The MGEX 1/100 Strike Freedom Gundam from Gundam SEED Destiny offers exceptional detail and articulation, capturing the iconic design with precision. This means you get a highly poseable figure straight from the box, perfect for dynamic display without aftermarket modifications.