How to Display and Care for Your Acrylic Standee Collection

Quick answer

Display acrylic standees on a stable, dust-free shelf away from direct sun and heat, dust them weekly with a soft brush, and clean smudges with a mild soap solution and microfiber cloth. Handle by the base, not the printed face, to avoid scratches and fingerprints.

Step-by-step acrylic standee care routine

1. Choose a stable, shaded display spot: Place standees on a level shelf or desk away from direct sunlight, radiators, and warm electronics. Leave a few inches of clearance around each stand so you can dust without knocking it over. Check the spot at midday: if you can see a sharp shadow from the standee, the light is probably too direct for long-term display.
2. Dust weekly with a soft brush: Use a clean, dry makeup brush or camera lens brush to sweep dust from the top edge downward. Avoid canned air, which can blow dust into the base joint and may leave propellant residue. Dust before it builds up; a weekly pass takes seconds and prevents abrasive particles from scratching the surface during cleaning.
3. Clean smudges with mild soap and water: Mix a drop of gentle dish soap in a cup of lukewarm water. Dampen a microfiber cloth, wipe the acrylic gently, then rinse the cloth and wipe again with plain water. Dry immediately with a dry microfiber cloth. Never use glass cleaner, alcohol, or acetone; they can cloud or craze acrylic. If a label or sticker left residue, use a tiny amount of olive oil on a cloth, then wash with soapy water.
4. Handle by the base, not the printed face: When moving a standee, grip the clear base or the edges rather than the printed character area. Oils from your fingers can etch or dull the surface over time, and pressure on the printed face can scratch it. If you need to reposition a standee often, consider a small acrylic putty or museum wax under the base to reduce accidental tipping.
5. Store spares flat and interleaved: For standees not on display, place them flat in a rigid box with acid-free tissue or a soft cloth between each piece. Avoid stacking heavy items on top, and keep the box out of attics or garages where heat and humidity fluctuate. Label the box with the date and contents so you can rotate standees without handling them all.

Product notes for your display plan

• Junji Ito Collection Tomie ACRYL Figure: Compact acrylic standee featuring Tomie from the Junji Ito Collection. Its small footprint suits a desk or a tightly spaced shelf, but the clear acrylic shows dust quickly, so a weekly pass with a soft brush keeps it looking clean.

  

• TV Anime DANDADAN: Aurora Acrylic Stand Okarun: Measures approximately H120 x W60 mm with an aurora finish that adds a shimmering effect. The aurora coating can show fingerprints more readily than plain acrylic, so handle it by the base and clean with a dry microfiber cloth before using any liquid.